- Designed for OEM applications where the controller manufacturer implements their applications using X10 Powerline control.
- TTL control signals
- X-10 send and receive capability
The Two-way PLC interface(XM10U) has been designed for controller manufacturers to implement X10 PLC control. The functionality of the PLC control is decided by the controller manufacturer and implemented in the controller panel. An accompanying document defines the interface that the user will need for implementing X10 control. With a control panel which has been designed to interace with X10 PLC, the installation is simple. Just plug the XM10U into the 230V power supply and use a telephone cable to connect the XM10U RJ11 socket to the control panel. A red LED will glow when power is being received by the XM10U. It will flash slowly when X10 signals are being exchanged.
Ducumentation and Software
Supply Voltage: 230V +10%-15%50Hz
Ambient Temperature: -10șC to +40șC (operation)
-20șC to +70șC (storage)
Serial data input:
Min.logic "1": 4V input will sink approx 2.5mA
Max.Logic "1": 20V input will sink approx 18mA
Max.logic "0": 0.8Vwill sink approx 0.1mA
(Voltages and currents with respect to terminal 2)
Note: this output is an open collector transistor. Therefore, the logic "1" voltage is quoted as a reference for defining the output leakage current. An output pullup resitor is required to generate a logic level. The pullup can be returned to any voltage up to 20V with respect of terminal 2.
HF output to ACpowerline: 60mW average into 5 ohms load (5Vpk-pk instant)
Conformity: Class 116 of EN50065-1
Carrier frequency: 120kHz ±2Khz
Width of X10 envelope: 1ms+100 sec-50 sec
Isolation voltage: 4kV rms 50Hz for 1 min.
Approvals: CE approved
Max phase delay between 0 crossing point of AC power line and 0 crossing detect output(either transition) is 100”sec.
Max allowable delay between transitions on 0 crossing detect output and serial data input "0"-"1" transition is 50”sec.
Max delay between serial input envelope "0"-"1" transition and carrier burst reaching 90% is 50”sec.
1. (Black) Zero Crossing
2. (Red) Common
3. (Green) X-10 Receive
4. (Yellow) X-10 Transmit
Dimensions: Length 160, Width 68, Height 50 mm
This product is CE approved for use in the EU.