- Replaces any normal dimmer for X10 control of branch lighting circuit rated between 60W and 300W.
- Works with any X10 controller.
- Also works manually.
The X10 wall mounted dimmer is a 300W receiver module that is controlled by any X10 controller. It can be used like any ordinary dimmer. The LW10U simply replaces a normal light switch and is mounted in a flush box. The unit only requires phase and switched phase wiring. It is especially designed to function without a neutral connection. The LW10U responds to 'standard' X10 - i.e. "All lights on" or "All units off" from any X10 controller set to its house code regardless of unit code or alternatively individual unit control by "On", "Off", "Bright" and "Dim". House codes and unit codes are under the rocker switch.
This unit is used for scene lighting, typically in living rooms, dining rooms, bedrooms etc.
Supply voltage: 230V +10%/-15% 50MHz
Supply current: 15mA capacitive
Making capacity: 60 to 300W(incandescent lamp only)
Regulating Time: 3.7 sec ±0.2 sec from fully on to off
EMC emission: According to EN50081-1
EMC immunity: According to EN50082-1
Electrical safety: According to EN60950 & EN60065
Signal sensitivity: 15 mVpp min,50mVpp max @120 KHz
Connections: Screw type terminals for
phase and switched phase
Ambient temperature: -10șC to +50șC (operation)
-20șC to +70șC (storage)
Dimensions: Length 85, Width 85, Height 30 mm
This product is CE approved for use in the EU.