£177.16 (£212.59 inc VAT)

C-Bus Panel Mount 1 Channel Relay
[5101R] - Stock: 2

CE Approved

The C-Bus One Channel Relay Unit is a panel mount unit suitable for switching resistive, inductive and fluorescent loads. The units are ideally suited for mounting inside fluorescent lighting products, street lighting columns and adjacent HID luminaries due to their small size and volume.

These relay units feature a remote override for on/off control and a C-Bus Status indicator.

Load control is provided by a special dual contact relay designed for extreme long life with lighting loads, even with power factor corrected fluorescent lamps. One contact is tungsten designed to withstand high inrush currents and arcing when opening and the other contact is silver alloy for steady state current operation.

The relay features a 0-10V output and is compatible with dimmable electronic ballasts, hence the relay may be used to switch line voltage to the ballast as well as dim the output using the 0-10V output.

The single channel relay unit is available as a passive model only, hence does not supply current to the C-Bus network.

  • Programmable via the C-Bus configuration software.
  • Programmed variables are stored in non-volatile memory and are retained in case of loss of mains or C-Bus power.
  • Remote on/off control independent of C-Bus communications.
  • Programmable power up state following power cycling.
  • Login states (and/or) programmable using the C-Bus configuration software.
  • Panel mounted, small size and volume.
Line Supply Voltage220-240Vac
Supply Voltage47-53Hz and 57-63 Hz
C-Bus Supply Voltage15-36VDC @ 0mA
Load Rating per Channel10A
Contact TypeSwitched active
Switch OperationsGreater than 60,000 operations
Inrush Current120mA (20msec)
Compatible LoadsResistive, inductive, incandescent and fluorescent
Analog Output0-10VDC, compatible with up to 2 x 36W dimmable electronic ballasts
C-Bus Source Current0mA
Maximum Number of Units on a Single C-Bus Network100
Status IndicatorsC-Bus Power Available
Load TerminationPush connectors, 1 x 2.5mm²
Warm Up Time5 seconds
C-Bus TerminationScrew terminals
Operating Temperature0°C to 45°C
Operating Humidity0 - 95% RH, non condensing
CompliancesCE, RCM
Reviews

Manufacturers
Quick Find

Use keywords to find the product you are looking for. Advanced Search

We Accept
0 items
Manufacturer Info
Clipsal
Clipsal
Clipsal Homepage
Other products