The 5754PE light level detector is a C-Bus input unit that measures the ambient light level and converts the information into messages that are sent across the C-Bus network.
Ambient light levels are compared to the user-defined target light level. Control messages are then sent to output units to alter the lighting levels as required.
The detector readily mounts on solid surfaces such as masonry or wood. A single twisted pair connection provides both the C-Bus network interface and power for the detector.
- Quickly mounts on solid surfaces such as masonry or wood
- Extends only 33mm from the mounting surface
- Ambient light level measurement range from 0–2000 lux
- Trimpot controls on the unit set the light level adjustment and the light level threshold
- SELV/Class 2 device. Powered from the C-Bus network. Requires no connection to building power
- Removable connectors allow for daisy chain wiring. The unit can be placed anywhere on the C-Bus network
- LED indicators show when light level monitoring is active and when the assigned C-Bus group is active
- Programmed using C-Bus Toolkit software
- Light level threshold value is set in software
- Software provides selectable group addressing for the light level target
- Selectable group address for the light level margin
- Selectable group address for High/Low lux levels
- Selectable block for which the High/Low thresholds are controlled by a group
- Bank switching of lighting levels based upon the Light Level Set Point
- Daylight harvesting to maintain a constant user-configured light level
Supply voltage | 15 - 36V d.c. supplied by C-Bus network. Does not supply power to the network. |
Current (active) | 15 mA |
Detection coverage (PIR) | 360° Passive infrared (PIR) 7.6m diameter at 2.7m height |
Light level sensor range | 0 to 2000 lux |
Controls | Trimpot A: light level threshold adjustment |
| Trimpot B:light level threshold adjustment |
Indicator LEDs | Red LED: light level maintenance is active |
| Orange LED: assigned network group is active |
Ambient operating temperature range | 5° to 50° C |
Ambient operating humidity range | 10 to 90% RH (non-condensing) |
Standards tested to | AS/NZS CISPR 22, IEC CISPR 22 and CISPR 24, EN 55022 and EN 55024, RoHS |
Warranty | Two-year warranty against manufacturing defects. |