£640.03 (£768.04 inc VAT)

C-Bus Network Bridge
[5500NB] - Stock: 3

CE Approved

The C-Bus DIN Rail mounted Network Bridge, is a network support device that provides a communication channel between C-Bus units on separate networks. This makes programming and monitoring of C-Bus devices on remote networks possible from a single point.

For ease of installation the unit is DIN rail mounted measuring 4M wide.

Both sides of the C-Bus Network Bridge are optically isolated, providing electrical isolation between each of the two networks.

The C-Bus Network Bridge is required when the single network limitations of a system have been reached. Such as when the total number of C-Bus units exceeds 100 and or when the total length of unshielded twisted pair (UTP) cable exceeds 1000 metres.

C-Bus Network Bridges may also be used between each floor in a multi-storey building to provide isolation from one network to another.

The C-Bus Installation Software is used to configure the device. Communication with other C-Bus devices and the supply voltage is obtained via a single C-Bus twisted pair cable.

In the event of a power failure, an inbuilt non-volatile memory retains programmed information relating to the current operating status of the unit.

  • DIN Mounted measuring 4M wide.
  • Designed to meet Australian and European standards for EMC Compliance and Safety.
  • Configured via the C-Bus Installation Software.
  • An inbuilt non-volatile memory retains programmed information of the unit in the event of a power failure.
  • Communication with other C-Bus devices and the supply voltage is obtained via a single C-Bus twisted pair cable.
  • Dimensions, H = 85mm, W = 72mm, D = 65mm.
Reviews

Manufacturers
Quick Find

Use keywords to find the product you are looking for. Advanced Search

We Accept
0 items
Manufacturer Info
Clipsal
Clipsal
Clipsal Homepage
Other products