Flat digital temperature sensor for use with the 5104DTSI.
The CBus Digital Temperature Sensor (Flat) works with the 5104DTSI Input Unit. It has an accuracy of +/- 0.5°C in a temperature range of -10°C to 80°C. Whilst the sensors will measure temperatures as low as -40°C and as high as 100°C, the accuracy in these extended ranges will be only +/-2°C. It should also be noted that the temperature rating of the sensor cable is only -10°C to 100°C. If sensors are installed in locations where the temperature falls
below -10°C, additional mechanical protection needs to be added to the sensor cables as only the sensor tip is rated to operate down to -40°C.
Each sensor is supplied with 2 metres of cable that can be shortened or extended up to 25 metres.
The sensors are powered by the input unit and require only two wires for their connection: a ground (common) wire and a data wire.
|Device type||Digital temperature sensor, flat tip, integral cable|
|Measurement range||-40° C to 100° C|
|Maximum number per input unit||4, in any combination of types, 1 per channel. Empty channels are permitted.|
|Application||Indoor or outdoor. Suitable for harsh environments|
|Cable||2-conductor, insulated, 2m long. Maximum extension length is 25m per sensor.|
|Cable diameter||4 mm|
|Probe tip material||314 grade stainless steel|