The Barix Annuncicom Intercom 200 PoE is a network-based intercom system, featuring fast setup, operation over existing network connections, flexible use and easy reconfiguration.
The Annuncicom 200 can work with other Annuncicom devices in a standalone configuration, or can be seamlessly integrated with IT equipment like PCs, central management or telephony systems.
- VHF Radio Controller and interface to IP
- Microphone Encoder for IP Audio Surveillance
- Door Intercom Controller, VoIP based
- Help Point/SOS call box device
- Classroom VoIP device with built-in amplifier, talkback, serial port
- Paging and Audio Distribution with Amplifier control and monitoring
- Live IP Audio Encoder for Streaming Applications
- Generic, bidirectional full-duplex VoIP module for Paging and Intercom Applications
- SIP and IP Paging Zone Device
- Digital Annunciator, Message Player, Message Repeater
- MP3, G.711, G.722*, PCM Encoding
- MP3, G.711, G.722*, PCM Decoding
- Shoutcast/Icecast Source capability
- Audio Level Supervision with SNMP Trap generation
- IP Streaming via TCP, UDP, RTP, Multicast
- Microphone Input
- Line Level Input
- Line Level Output
- Amplified Output 8W (8 Ohm)
- Relay Output (1)
- Contact Closure Input (2)
- RS-232 Serial Port (1)
- RS-485 Serial Port (1)
- Isolated Power Supply Input (PoE or ext)
- Supply Voltage (16..30VDC or 48VDC)
- Aiphone Door Station Interface (IE/JE series)
Electrical
- 802.3af PoE 48 VDC, 12 Watt max. on RJ-45 connector and on screw terminal block
Ethernet
- 10/100Mbps auto
- RJ-45 connector with integrated Link/Activity LED
- Protocols: TCP/IP, UDP, RTP, SIP, DHCP, Multicast capable
Microphone Input
- On detachable screw terminal block and 3.5 mm (1/8“) Jack 3 pin TRS, with bias power 2.7VDC
Aiphone sub interface
- For Aiphone „IE“ door stations, on screw terminal block
Analog Line Input (mono)
- Line level input, 2k Ohm input impedance on on screw terminal block, 2.2 VPP max, adjustable in sensitivity
- Frequency response 20 Hz .. 20 kHz (-3dB)**
- Dynamic range 87 dB, SNR -87 dB, THD <0.01% (-3dBFS)**
Analog Line Output (mono)
- Line level output, 40..60 Ohm output impedance on screw terminal block, output level software controllable
- Full scale output voltage: 3 dBu, 3 VPP
- Frequency response 20 Hz .. 20 kHz (-3dB) (depending on codec)
- Dynamic range 94 dB, SNR -94 dB, THD <0.03 % (-3dBFS) (depending on codec)
RS-232 and RS-485 Interfaces
- On 9-pin Sub-D connector
- 300..230‘400 Baud asynchronous, tunneling or local control
Speaker out
- On detachable screw terminal block
- Suggested speaker impedance 8 to 16 Ohm
- 8 Watt max @ 8 Ohm
- Frequency response 20 Hz .. 20 kHz (-3dB) (depending on codec)
- Dynamic range 80dB, SNR -80dB, THD <0.15% (-3dBFS) (depending on codec)
Mechanical
- Aluminum case, 420 g
- Dimensions 108 x 38 x 125 mm (4.25 x 1.5 x 4.92 inch)rack and wall mountable using accessories
Audio formats
- MP3 VBR, CBR*
- MP3, encoding/decoding up to 192/320 kbps
- PCM 16 bit and 8 bit (uLaw, aLaw) @ 8..48 kHz
- PCM, G.711, G.722*, encoding/decoding
Discrete I/O
- On detachable screw terminal block:
- 1 relay output with normally closed and open contacts, 30V 0.5A (AC & DC)
- 2 discrete / dry contact inputs/li>
MTBF
- calculation min. 370 000h (according to MIL217F at 25°C)/li>
