£292.21 (£350.65 inc VAT)

Barix Annuncicom 60
[ANNUNCICOM60] - Stock: 0

CE Approved

The Annuncicom 60 is a generic IP Audio device designed to serve as a gateway between IP based VoIP, Paging, Intercom systems and traditional systems or call boxes, loudspeakers and microphone

Based on reliable, embedded, low power, solid state technology, the devices are ideally suited for 24/7 operations, do not need cooling or maintenance, and are not prone to usual issues caused by computer operating system

The Annuncicom 60 can be operated with standard IP Audio firmware or a SIP application firmware from Barix. Custom applications can be loaded as well. The Annuncicom 60 allows direct connection of a typical ceiling speaker, an amplifier (balanced interface), microphone or line input and a dry contact. A serial port allows control of RS-232 devices, locally or via the network.

Applications include:

  • Generic VoIP Intercom and Paging Device with speaker amplifier
  • Classroom VoIP device with built-in amplifier, talk back, serial port
  • Microphone Encoder for IP Audio Surveillance
  • Help Point/SOS call box device
  • Door Intercom Controller, VoIP based
  • Generic, bidirectional full-duplex VoIP module for Paging and Intercom application
  • IP and IP Paging Zone Device

Software Annuncicom 60 available

  • MP3, G711, G.722, PCM Encoding
  • AACplus, MP3, Ogg Vorbis, G.711, G.722, PCM Decoding
  • Shoutcast/Icecast Source capability
  • Audio Level Supervision with SNMP Trap generation
  • IP Streaming via TCP, UDP, RTP, Multicast
  • Microphone Input
  • Line Level Output (balanced)
  • Amplified Output 5W (8Ohm)
  • Contact Closure Input (1)
  • RS-232 Serial Port
  • Power Supply (PoE)
Audio and contact closure interfaces are provided on a joint removable screw terminal block


  • 802.3af PoE on RJ-45 connector
  • 48 VDC nomimal, 12 Watt max.


  • 10/100Mbps auto rate, full/half duplex
  • RJ-45 connector with integrated Link/Activity LED
  • 802.3af PoE support
  • Protocols: TCP/IP, UDP, RTP, DHCP, Multicast capable

Audio Input

  • Characteristics/mode selectable by software:
  • “Mic” mode:
  • tba, bias power for electret microphone supplied “Line” mode:
  • 2kΩ input impedance
  • 3.9 VPP max, adjustable in sensitivity
  • Frequency response 20 Hz .. 18 kHz (-3dB)*
  • Dynamic range 87 dB, SNR -87 dB, THD <0.1% (-3dBFS)*


  • Aluminum case, 280g
  • Dimensions 108 x 38 x 78.7 mm (4.25 x 1.5 x 3.1” inch)
  • rack and wall mountable using optional accessories


  • min. 500 000h (according to MIL217F at 25°C)

Analog Line Output (mono)

  • Transformer isolated, balanced (600 Ω)
  • Output level software controllable
  • Full scale output voltage: 5.7 dBu, 4.2 VPP, 4.7 dBm @ 600 Ω
  • Frequency response 30 Hz .. 18 kHz (-3dB)*
  • Dynamic range 88 dB, SNR -88 dB, THD

Speaker out

  • Suggested speaker impedance 8Ω (min.)
  • 5 Watt max output power @ 8Ω
  • Values @ 8Ω:
  • Frequency response 25 Hz .. 12 kHz (-3dB)*,
  • Dynamic range tba, SNR tba, THD <1% (-3dBFS)*

RS-232 Interface

  • On 9-pin Sub-D connector, male
  • 5-wire (Tx,Rx,RTS,CTS)
  • 300..230‘400 Baud asynchronous, tunneling or local control

Supported Audio formats

  • PCM, G.711, G.722, MP3 encode/decode
  • AAC+ decode
  • PCM 16 bit and 8 bit (uLaw, aLaw) @ 8..48 kHz

Discrete I/O (Contact Closure Input)

  • 1 discrete / dry contact input
* depends on used codec, best results @48kHz PC
Quick Find

Use keywords to find the product you are looking for. Advanced Search

We Accept
0 items
Manufacturer Info
Barix Homepage
Other products