£465.00 (£558.00 inc VAT)

Infrared Output Unit, E2000 Series, 2 channel
[E5034NIRTWE] - Stock: 0

CE Approved
Special order item

The Infrared Output Unit is a C-Bus device, which is used to control audiovisual and air-conditioning units. The infrared output module is powered from the C-Bus network and no additional power supplies are required.

The infrared module can store up to 200 native IR codes on the unit, stored on non-volatile memory. Additional IR codes may be downloaded to the unit, at any time, before or following installation. The IR codes are triggered by a C-Bus group address, which may be initiated from a C-Bus key input, touch screen or any of the C-Bus application software suites.

The infrared output unit features two infrared emitter outputs that are individually addressable. Multiple infrared units may be located on the same C-Bus network, providing localised control of IR devices.

The infrared unit is supplied with an extensive IR code library with popular AV and HVAC manufacturers codes. An optional IR code reader type 5100RP is available which may be used to learn IR codes that aren't already in the CIRCA software. IrDA remotes are not supported.

The 5100HSCU high speed programming cable is necessary to program this unit. Programming over the C-Bus network is not available for IR code data.

  • Up to 200 unique IR codes may be stored on the infrared unit.
  • Programmed using the 5100HSCU high speed programming cable.
  • Suitable for audiovisual and air-conditioning control.
  • Each infrared channel is software addressable.
  • Mounts onto a standard single gang wall plate.
  • CE Compliant
C-Bus Supply Voltage15-36VDC @ 18mA
IR Code Capacity200 IR codes stored on unit
IR Carrier Frequency30-455KHz
Maximum Number of Units on a Single C-Bus Network50
Status IndicatorsProgrammable, (Unit and IR transmit)
Warm Up Time5 seconds
C-Bus TerminationScrew terminals
Programming Port4 way SIL header - Must only be connected to 5100HSCU programming cable.
Emitter Outputs2 x 3.5mm TRS sockets
Network ClockSoftware selectable
Network BurdenSoftware selectable
Operating Temperature0°C to 45°C
Operating Humidity0 - 95% RH, non-condensing

Quick Find

Use keywords to find the product you are looking for. Advanced Search

We Accept
0 items
Manufacturer Info
Clipsal Homepage
Other products