- Wired-in for permanent connection.
- On/Off and dimming control of incandescent lighting.
- Available in a wide range of plug styles.
- Designed to operate with 230V AC 60W to 300W incandescent lamps.
The LM12W X-10 Inline (wired-in) lamp module is a 300W receiver unit that works as a remote dimmer. The connected lamp can still be switched on and off locally. The dimmer function, however, is an X-10 remote control. The dimmer module can be wired inline with incandescent lamps between 60W and 300W. Simply wired the unit inline with the Live connection of the lamp to be controlled and set the wheels on the front of the unit to the desired device address.
The lamp connected to the dimmer module can still be controlled locally by its own switch, but don't forget to leave the local switch in the "ON" position, as otherwise the lamp cannot be controlled by an X-10 controller. Switch the lamp off by remote control. The unit responds to "standard" X-10 commands. ie. All-Lights-On, All-Units-Off, On, Off, Bright and Dim.
This unit is a general purpose unit for adding X-10 control to incandescent lamps.
Supply voltage: 230V +-10% 50Hz
Supply current: =< 20mA capacitive
Making capacity: 60W to 300W (incandescent lamp only)
Connections: Live, Neutral, Switched Live (load)
Regulating time: 4.4s +- 0.2s from full On to Off
EMC emission: According to EN50081-1
EMC immunity: According to EN50082-1
Electrical safety: According to EN60950 and EN60065
Signal sensitivity: 15mVpp min 50mVpp max at 120KHz
Input impedance: =>55 Ohms (L-N) at 120KHz
Ambient temperature: -10C to +40C (operation)
-20C to +70C (storage)