£25.75 (£30.90 inc VAT)

X-10 Universal Module
[UM7206] - Stock: 0

CE Approved
The UM7206 X-10 Universal Module contains an isolated contact relay and a piezo sounder(beeper). It can be set to operate as a beeper only, as an isolated contact relay or both. It can be set for momentary or continuous operation for the sounder and/or isolated contact relay. The isolated contact relay is rated for 5A at 24VDC. When set to continuous operation the relay contacts and/or the module beeps continuously when an "On" command is received. When an "Off" command is received the relay contacts open and/or the beeper stops. When set for momentary operation the relay contacts close and/or the beeper gives three or four beeps when an "On" command is received. The relay contacts then open automatically after about 0.5 seconds and/or the beeper stops automatically after three or four beeps. In this mode, "Off" commands are ignored. The module has a test (ON) button and a unit (OFF) button. Supplied with a UK 3-pin or Euro 2-pin plug.

Key Features

  • On/Off control of isolated contacts to switch any kind of low voltage load.
  • Can be set for momentary or sustained contact closure.
  • Has a beep to use as an annunciator.

Technical Data

Supply voltage:230V ±10% 50MHz
Supply current:<=20mA capacitive
Making capacity:5A at 24 VDC
EMC emission:According to EN50081-1
EMC immunity:According to EN50082-1
Electrical safety:According to EN60950 & EN60065
Signal sensitivity:15 mVpp min,50mVpp max @120 KHz
Input impedance:>=50ohms(L-N)at 120kHz
Approvals: CE Approved
Ambient temperature:-10°C to +50°C (operation) -20°C to +70°C (storage)
Reviews
Manufacturers
Quick Find

Use keywords to find the product you are looking for. Advanced Search

We Accept
0 items
Manufacturer Info
X10
Other products
C-Bus