The UM7206 X-10 Universal Module contains an isolated contact relay and a piezo sounder(beeper). It can be set to operate as a beeper only, as an isolated contact relay or both. It can be set for momentary or continuous operation for the sounder and/or isolated contact relay. The isolated contact relay is rated for 5A at 24VDC. When set to continuous operation the relay contacts and/or the module beeps continuously when an "On" command is received. When an "Off" command is received the relay contacts open and/or the beeper stops. When set for momentary operation the relay contacts close and/or the beeper gives three or four beeps when an "On" command is received. The relay contacts then open automatically after about 0.5 seconds and/or the beeper stops automatically after three or four beeps. In this mode, "Off" commands are ignored. The module has a test (ON) button and a unit (OFF) button. Supplied with a UK 3-pin or Euro 2-pin plug.
Key Features
- On/Off control of isolated contacts to switch any kind of low voltage load.
- Can be set for momentary or sustained contact closure.
- Has a beep to use as an annunciator.
Technical Data
| Supply voltage: | 230V ±10% 50MHz |
| Supply current: | <=20mA capacitive |
| Making capacity: | 5A at 24 VDC |
| EMC emission: | According to EN50081-1 |
| EMC immunity: | According to EN50082-1 |
| Electrical safety: | According to EN60950 & EN60065 |
| Signal sensitivity: | 15 mVpp min,50mVpp max @120 KHz |
| Input impedance: | >=50ohms(L-N)at 120kHz |
| Approvals: | CE Approved |
| Ambient temperature: | -10°C to +50°C (operation)
-20°C to +70°C (storage) |
