The LW12 module measures only 40mm square by 15mm deep and can be installed virtually anywhere, It does not require a Neutral connection, so is easily retro fitted behind an existing light switch (the switch would then need to be changed to a momentary action switch).
The unit also offers soft start, and dim, which means the light slowly fades up from off, when turned on, and slowly fades down to off, when turned off. Not only does this create a hi-tech feel to your lights, it also increases bulb life dramatically. The unit also remembers it's last dim level, so when next turned on, will return to that same level.
The module contains a special electronic fuse which opens if there is an over load, or the bulb blows, and then closes again when the fault goes away.
- Soft start
- Soft dim
- Remembers last setting
- No neutral wire required
- Your own style of momentary switch
- X-10 programmable, no house/unit dials
- Optional responses to X-10 All-Units and All-Lights commands
|Supply voltage:||230V +10%/-15%, 50Hz|
|Measurements:||46mm x 46mm x 17mm (HxWxD)|
|Installation:||50mm deep wall boxes advised|
|Load Capacity:||60W to 250W. Tungsten and halogen lighting (230V and halogen on low voltage)|